Woodenbox Introduction
We created this box to store our coin money. This box is inspired by this file :http://www.thingiverse.com/thing:32105 . We changed the size, shape and artwork to fit our specifications.
The main changes are in the legs of the box and the opening and closing hinges.
The main changes are in the legs of the box and the opening and closing hinges.
Downloads
In Order to Make the Box.
We created a illustrator file at 300 DPI.
we used a multiplex 5 mm width and a lasercutter at 100% power , 40% speed.
To engrave the text we make a little mistake. The filled engrave created with 30% power at 40% speed and the outline engraving at a 13% power , 40 speed. That is why we needed to give it a second pass.
we used a multiplex 5 mm width and a lasercutter at 100% power , 40% speed.
To engrave the text we make a little mistake. The filled engrave created with 30% power at 40% speed and the outline engraving at a 13% power , 40 speed. That is why we needed to give it a second pass.
Print, Glue and Enjoy
we use wood-glue to construct the box. we also use some tape to be sure everything stays in place (by the lack of clamps).
remove al overflowing glue from the sides.
remove al overflowing glue from the sides.