Wooden Radar Tower Toys | Working Rotating Antenna

by balsuryana in Living > Toys & Games

1892 Views, 9 Favorites, 0 Comments

Wooden Radar Tower Toys | Working Rotating Antenna

100_9779.JPG
100_9773.JPG
Using wood, you can make anything using wood because wood is easy to get, easy to transform and the price is not expensive. In this Instructables, I will show you how to make a simple wooden toys. I will made a Radar Tower toys, and the best things of this toys is the antenna of the toys is can working and rotating.

OK LET'S MAKE IT!

You Will Need

100_9748.JPG
100_9749.JPG
100_9756.JPG
100_9771.JPG
Parts:



• 0,5mm Thick block / wooden board
• Small dc motor
• Some cables
• AA Battery holder
• 2 AA battery
• Small nails


Tools:



• Pen / marker
• Ruler
• Knife
• Sandpaper
• Hammer


Lets Make It

100_9750.JPG
100_9751.JPG
100_9753.JPG
100_9754.JPG
100_9757.JPG
For make the template, i will make isosceles triangle shape. The up side is 1 inch, and the down side is 3 inch. I draw the template on the wood.

Next, i cut the wooden board using knife and for make the cut is good, i using ruler to help me cut the wood. Made 4 parts of the wooden boards. Next, make all the wooden parts smooth using sand paper.

Make It More Details

100_9758.JPG
100_9759.JPG
100_9760.JPG
100_9762.JPG


• For make it more details, i make a hole on the bottom of the wooden parts like image1 and i cut it. It will looks like letter A. Next make it smooth using sandpaper.




• Next, nail all off the wooden parts like image, after that i'm make the edge smooth using sandpaper.


The Antenna

100_9761.JPG
100_9763.JPG
100_9764.JPG
100_9766.JPG
100_9768.JPG
100_9770.JPG
100_9772.JPG


• For the antenna, i cut a small wooden board to rectangle.




• Next, i cut all the edge and make it smooth again.
• After that, I cut the center of it and i bend it, like image 3.
• For the holder, i use a pen cardridge and i glue it to the antenna and the motor
• Roll / solder the wire to the motor
• Insert the motor to the tower and glue it


Finish

100_9778.JPG
Plug in your circuit to the battery holder, insert the battery, and the antenna will rotate.

You can add colors or anything to your toys.
Happy making

Thanks for look my works

sorry for my english

I hope you can make it better than me.

Thanks