Wooden Mag-Safe Tripod Mount for IPhone

This is a one-day project to make a wooden MagSafe iPhone tripod.

I use my iPhone as my main camera for video shooting. After half a year of use, I found this a very convenient device because it allows me to quickly mount and change the place of my iPhone.

It works well with iPhones that have MagSafe and also with iPhone MagSafe cases.

If you are interested in how to make a wooden tripod, here is my Instructable: Small Wooden Tripod

The video is about the process of making

Wooden MagSafe Tripod Mount for iPhone

#woodworking #magsafe #iphone #cameraequipment #lasercutting #laserengraving

Tools:

• DIY Laser cutter/engraver 520x520mm, 5.5w
• Sander
• Tweezers

Components:

• Magnets: d=3mm, l=3mm, NdFeB, attract weight 250g, magnetization N38
• American walnut veneer 4.5mm
• Sandpaper 220 grit
• Sticky tape
• Protect film
• Oil: Belinka Oil
• Glue: Titebond 3 dark, CA Glue + Activator

GitHub Link

I have used American walnut veneer 4.5mm

You may need to use tweezers to align the magnets to the workpiece.

I used sandpaper 220 grit