Wooden Locker Shelf
You know those stupid skinny napoleon dynamite lockers, well I have one of those lockers.
so I built this locker shelf.
so I built this locker shelf.
Materials
wood
nail/screw/staple gun (just something to attach the pieces of wood together)
locker
table saw
Measure and Cut
Measure the length and width of your locker, the height is your choice.
The top shelf is the same width as the inside of the locker.
The two pieces below the top are the width minus the thickness of the two side pieces.
Cut the skinny piece of wood as shown.
Cut the side pieces to the length of your locker but to the height of your choosing.
The top shelf is the same width as the inside of the locker.
The two pieces below the top are the width minus the thickness of the two side pieces.
Cut the skinny piece of wood as shown.
Cut the side pieces to the length of your locker but to the height of your choosing.
The Middle Shelf
Cut two pieces of wood to about 0.5" by 0.5" by the length of the locker.
mount it to the side piece at the height of your choice.
mount it to the side piece at the height of your choice.
Final Product
Your done.
if you measured and cut right it will fit in your locker.
if you measured and cut right it will fit in your locker.