Wooden Chair

Made it for the contest :-)

wood planks

screws

wood glue

screw driver

paint

bracket

Cut the 47x10 wooden planks from one corner to the other, repeat this with all 4

You should now have 8 pieces

By turning one of the halves around it should taper down to a point.

You can glue and screw them in place, do so with all four.

Match the corners to the 28x31 board and screw in from the top.

Add the 3x3 and bracket for extra support.

Place the 30x7 wooden planks on top, glue and screw them in place, alternatively you can use nails for this as well.

Give the whole chair a coat of paint of your choice.