Wooden BMW Logo (reclaimed Wood)

by codygagegcole in Workshop > Laser Cutting

420 Views, 1 Favorites, 0 Comments

Wooden BMW Logo (reclaimed Wood)

IMG_2556.png

I laser cut a BMW Logo into a piece of reclaimed wood.

Supplies

IMG_2542.png
IMG_2544.png
IMG_2546.png
  • Piece of wood
  • tape measure
  • pencil
  • saw
  • laser cutter

Prep

IMG_2543.png
FUDDRL1KX0EIT8R.png

First you need to grab your piece of wood and measure out how big you want it to be. I made mine 8in x 8in. Then outline your square.

Cutting

FG3P3UKKX0EIT8S.png

Then cut your square out on your saw. Make sure to wear your safety goggles!

Set Up the Laser

bimmer.png
IMG_2547.png

Next you're going to set up your laser cutter. I put my file into the program (feel free to take the PNG of the BMW Logo). Then resize to be the right size for your piece of wood, make sure you leave an inch on all side (so mine was 7x7).

LASER!!!!!

IMG_2555.png
FPGM851KX0EIT8N.png

Put you wood in and start cutting. It took it about 25 minutes to finish the cut. Now enjoy your finished project!