Wood Lighting
Wood lighting
What Kind of Tools Do You Need?
·
One piece wood which has 40 cm length. ( apple tree )
· One piece Plexy tube which has 30 cm length and 4 cm width.
· Glue for wood.
· Cellulose based varnish
· One piece brush which is 5 cm
· Led light emitting diod which is 200 cm ( yellow )
· Led light emitting diod setting adaptor
· Workplace tools.
o Blade of a band saw
o Hammer
o Nail
o Driller
o Sanding machine
How to Begin?
Wooden is sliced by blade of s band saw with 2 cm length.
After that, all slices’ center point is cut by driller.
Slices, which are cut from center point, are rubbed with emery to have rubbed surface.
Glue for wood is applied to prevent fracture and waited to dry for a day.
Japanning to Wooden Slices
Wooden slices are varnishing with the brush and after that wooden slices are dried. This process is done 2 or 3 times.
Plexy Tube Grinding
Plexy tube is cut by blade of a band saw and it has 40 cm length. After that plexy tube has matt surface with machine
Final Step
All slices are positioned on the plexy tube according to layout. ( There is no need to any glue. Dry wood is tighten up and prevent to move. ) After, led light emitting diod, which is 200 cm, is placed into tube and illumination is done.
Final Illumination
