Wood IPod Stand

by sprorok in Circuits > Apple

609 Views, 2 Favorites, 0 Comments

Wood IPod Stand

13, 2:58 PM.jpg
13, 2:58 PM.jpg

Materials

13, 2:58 PM.jpg
-saw -wood -drill -wire cutters -drill bit

Wood

13, 2:58 PM.jpg
13, 2:58 PM.jpg
Choose your wood.i just used scrap wood.

Cut

13, 2:58 PM.jpg
Cut 2 pieces of wood about 6 inches long

Cut 2

13, 2:58 PM.jpg
Cut an angle on your pieces to the distance between them u want

Drill

13, 2:58 PM.jpg
13, 2:58 PM.jpg
Next drill in the sides to make a spot for the third leg

3rd Leg

13, 2:58 PM.jpg
Cut third leg similar to the other 2 legs .(one next to screw in picture)

Drill

13, 2:58 PM.jpg
13, 2:58 PM.jpg
13, 2:58 PM.jpg
Line up 3rd leg between first 2 and continue the drill hole threw it

Nail

13, 2:58 PM.jpg
13, 2:58 PM.jpg
Put a nail to fit snugly in the holes

Trim

13, 2:58 PM.jpg
Trim off the extra nail

Lastly

13, 2:58 PM.jpg
Nail bottom board to set iPod on