Wood Stick Jewelry

by CsiGiRe in Craft > Jewelry

1680 Views, 6 Favorites, 0 Comments

Wood Stick Jewelry

DSCN0035.JPG
DSCN9996.JPG
DSCN0079.JPG
DSCN0024.JPG
r.jpg

Again, I try to make something new and simple , a wood jewelry. From the left wood stick I hit that what , I think look alike a modern cover . I like it the eplay of the light and shadows , especially when the sun shines on the wood sticks.

Commodity

DSCN9924.JPG
DSCN9925.JPG

I need wood sticks , and from these i cut a 2 little parts( 4.5 cm 1.77 inch) and 4 longer parts of (9.5 cm 3.74 inch)‎.

The Rectangle

DSCN9926.JPG
DSCN9928.JPG

In a rectangle shape frame the sticks and in the break-even point i abrade the sticks and i glue each other . In the rectangle on the same distance from the middle. I glue 2 sticks‎ and finally I put a circle in the both heels and on this a chair.‎

The Wood Sticks

DSCN9960.JPG
DSCN9962.JPG
DSCN9964.JPG

‎I glue the sticks on the base. One part of the sticks I glue under the frame and the other part on the inside the stick. The sticks to the middle i glue always with a little lower before the middle a little higher and I glue the sticks in both sides. ‎

The Final Result

DSCN9991.JPG
DSCN9973.JPG

Finally I put a circle in the both heels and on this a chain.