Wood Planter With Casters

For a school assignment, I have decided to make a wooden planter with casters. With the quarantine, I was not able to go out to buy supplies so I used some wood lying around in the house.

Material

• wood planks
• 2'' caster wheels (4)
• 6d 2'' nails (30)
• #6 1'' screws (12)

Tools

• hand saw
• circular sander
• hammer
• screw driver
• power drill

The measurements:

• A: 26'' x 5.5'' x 0.75'' (2)
• B: 26'' x 2.75'' x 0.75'' (2)
• C: 10'' x 5.5'' x 0.75'' (2)
• D: 10'' x 2.75'' x 0.75'' (2)
• E: 26'' x 11.5'' x 0.75'' (1)
• 2'' swivel caster (4)

Cut the wood to the measurement using hand saw.

Use the circular sander to adjust the size and smooth the surface.

1. Attach the two D's to E to the two short ends using 2 nails each.
2. Attach the two A's to E to the two long ends using 7 nails each.
3. Attach the two C's on top of the D's using 2 nails each.
4. Attach the two B's on top of the A's using 4 nails each.
5. Attach the swivel casters on the bottom of E, one on each corner, using 3 screws each.

The planter is now complete and you can put in flower pots inside. You can move the planter to your place of preference.