Wood End-Table

Hello, and welcome to my Instructable on how to do a very simple, very easy to make Wood End-Table. I made this project with my mom while not having access to the usual supplies and tools, so this should be accessable to everyone that at the very least has a drill and some screws. The cost of this project is fairly low, coming up to around $150. I built this for my mother, who wanted a table. It was a fun project to work on, and only took about an hour of work. It could take even less if you know what you are doing.

• Plywood Round Table Top 17"x3/4"

https://woodcrafter.com/plywood-circles/?sku=pc171...

• Plywood Pillars,17"x1 1/2" https://www.lowes.com/pd/Waddell-Ash-End-Table-Le...
• Black Decker Drill https://www.homedepot.com/p/BLACK-DECKER-8-Volt-M..

• 10×1-7/16″ Screws (Any screws that are usable with Plywood will do) https://benefast.com/product/pro-twist-pwd101716p-...

As this is a really simple design and easy to do project that anyone can do at home, it wont be having many steps. For the first step, you want to get all your materials ready. A plywood round table top, and four plywood legs/pillars. Don't forget your measuring tape, and tools!

As a good habit I have, I always double and even triple check my materials just before any type of Project. Make sure you have your plywood round tabletop. I made sure the measurements were good, with the round tabletop being 17"x3/4". Each leg was about 17" long and 1" 1/2 wide.

Once you are nice and ready, the actual drilling part is fairly simple. Simply align the legs under the tabletop and drill the screws down from the top of the table into the legs.

After you screw in the legs to the round tabletop, you should be finished! As I stated before, it was fairly easy and simple project to do. Its one of my favorites for personal reasons, and is a fairly cheap project as well for a good product. Hopefully you'll like it as much as I did.