Wood Cutting Saw

Hi, Friends

Welcome to creativity buzz.

You can make a circular miter saw using wood.

1)775 DC Motor

2)DC Motor Clamp & Switch

3)10 Inch Slider

4)Ginder machine adapter

5)$ Inch Saw blade

6)Wood

Cutting wood in this shape of dimension.

1) 35 X 11 CM

2) 2 Nos. 25 X 4 CM

3) 2 Nos. 30 X 5 CM

4) 10 X 4 CM

5) 13 X 10 CM

6) 20 X 6 CM

7) 13 X 10 CM

Make holes in the wood plate and fit drawer slider in this wood.

1st thing Line the saw up on the plywood. Then mark a line along the base of the saw, on the end that's the furthest from the blade. Measure the line from the edge of the plywood to the mark that was just made. Carry that same measurement the distance of the plywood.
Take a straight object to make a straight line. In my case I used a Aluminum tubing. Now trace the line from end (Im still referring to the very 1st line from the edge of the saw base) Next move your straight object (aluminum tubing). Now measure from the router bit to the end of the router base. That's the distance you want to set your straight object from the line that I drew out first.

Join Handle as the picture.

Connect DC Motor To wood plate using aluminum brackets.

Joint the handle and base using the hinge.

Joint all materials to the dc motor.

Make wiring using pictures and supply 12-volt dc voltage.

Cut wood using this machine.