Wood Cup Coaster

I made this cup coaster from Ipe wood, here you can see the video how i did it.

First i made in my CNC Router the big circle and then engrave my logo.

Next step was cut all sides in the miter saw!

Now i make the holes for brass inserts whit a forstner bit.

Sanding with 220 grit a then spray some black tint.

Chopping the brass and gluing with super glue

Sanding the brass in the belt sander with 80 grit, then hole piece with a hand sander in 120, 240 and 320 grit, and finally by hand with 400 grit.

To finish I used mineral oil.

Time to enjoy... CHEERS!

Thank you very much, hope you all like.

Fabio