Women's Hair Barrette - Flower Pattern Ribbon
760 Views, 15 Favorites, 0 Comments
Women's Hair Barrette - Flower Pattern Ribbon
![gabe31777.jpg](/proxy/?url=https://content.instructables.com/FT9/JWB5/IE0UXPKW/FT9JWB5IE0UXPKW.jpg&filename=gabe31777.jpg)
![26171-93836.JPG](/proxy/?url=https://content.instructables.com/F2E/HN67/IE0UXPX9/F2EHN67IE0UXPX9.jpg&filename=26171-93836.JPG)
To make this Hair Accs you will need:
Miniribbon Bruni DIY Kit
http://miniribbon.com/product/bruni-diy-kit/
- What's in the box:
Love Flower Ribbon(15mm) - 49cm (22cm*1ea, 23cm*1ea, 4cm*1cm)
Barrette Clips(8cm) - 1ea
Accessory - 1ea
- What else is required:
Glue gun
Craft Lighter
Loctite
![26171-93837.JPG](/proxy/?url=https://content.instructables.com/FPU/CZK1/IE0UXPZ4/FPUCZK1IE0UXPZ4.jpg&filename=26171-93837.JPG)
Take 22cm-long and 23cm-long 'Love Flower Ribbon(15mm)', and gently fold each ribbon diagonally as shown in the picture.
![26171-93838.JPG](/proxy/?url=https://content.instructables.com/FR9/Z73F/IE0UXQ19/FR9Z73FIE0UXQ19.jpg&filename=26171-93838.JPG)
With two folded ribbons, pile them up together not to overlap all the edges.
![26171-93839.JPG](/proxy/?url=https://content.instructables.com/F01/FLRH/IE0UXQ4M/F01FLRHIE0UXQ4M.jpg&filename=26171-93839.JPG)
Place a wire at about 3cm ~ 3.5cm from the left side, and twist the wire to tighten it, to secure the bow.
![26171-93840.JPG](/proxy/?url=https://content.instructables.com/FMV/UE29/IE0UXQ5K/FMVUE29IE0UXQ5K.jpg&filename=26171-93840.JPG)
Take 4cm-long 'Love Flower Ribbon(15mm)', wrap the ribbon and glue on the back side.
![26171-93841.JPG](/proxy/?url=https://content.instructables.com/F7F/7F5K/IE0UXQ8S/F7F7F5KIE0UXQ8S.jpg&filename=26171-93841.JPG)
Cut the tails along the diagonal, and heat seal the ribbon with a lighter.
![26171-93842.JPG](/proxy/?url=https://content.instructables.com/FMY/AD3V/IE0UXQBK/FMYAD3VIE0UXQBK.jpg&filename=26171-93842.JPG)
Glue the ribbon element on the barrette. Add a dot of glue on both ends of barrette to secure.
![26171-93843.JPG](/proxy/?url=https://content.instructables.com/FSN/08RC/IE0UXQGG/FSN08RCIE0UXQGG.jpg&filename=26171-93843.JPG)
Apply Loctite to the backside of the accessory and stick on the ribbon.
There! Completed!
★ Please visit my website for other designs and tutorials.