Wire Tree on Rock

Materials:

1. 24 Gauge Copper Wire
2. Rock
3. Super Glue
4. Round Stick (thin paint brush)
5. Wire Cutter
6. Wire Plier

1. Cut wires 45 cm each.
2. Grab all wires and twist them.

1. Pull some wire to make branches.
2. Further divide wires to make small branches.

1. Roll the leaf wire on some round stick (thin paint brush) and slide the stick.
2. Do same for rest of the leaf wires.

1. Split the wires in segments from the bottom like we did it for branches.
2. Twist the half wire, again split it and twist.
3. All roots should not look same.

1. Place tree on rock.
2. Take a long piece on wire. Wrap wire on tree trunk and then wrap around rock with the same wire to hold tree on rock.
3. Push the roots on rock.
4. Hold all the roots one by one on rock with the help on wood stick and put super glue on root and rock to stick them.
5. Also put super glue on main trunk where the trunk touches the rock.
6. Remove the wire which was used to hold the tree on rock.