Wire Stripping Jig
Materials:
Table (plywood sheet and saw horses)
Two boards approximately 4'
1900 box (2)
Screws
Drill
Razor knife
Beer
Table (plywood sheet and saw horses)
Two boards approximately 4'
1900 box (2)
Screws
Drill
Razor knife
Beer
Wire Stripping
This is an easy way to strip long lengths of copper wire. Sorry for the lack of photos. Its pretty self explanatory.
Get a table at a workable height. Screw a 1x4 or something similar to it, get your wire next to it. Then sandwich the wire between another board. Use something on top the boards to prevent the wire from coming up. I used a metal 1900 box for this because it was handy. Get a razor knife and penetrate the insulation. Get someone to pull the wire as you dig the knife into the wire. It also helps if someone feeds the wire from the other end.