Wire Folding Stove

by UltimateSurvivalTips in Outside > Fire

967 Views, 15 Favorites, 0 Comments

Wire Folding Stove

14, 10:41 AM.jpg

Materials

14, 10:41 AM.jpg
14, 10:41 AM.jpg
14, 10:41 AM.jpg
You will need:
(2) wire hangars-without paint-
A pair of pliers
A ruler
Wire cutters

Measure

14, 10:41 AM.jpg
Measure out (2) 8.5 in. Segments from your hangars. You will also need (4) 6.5 in. Segments.

Assemble

14, 10:41 AM.jpg
14, 10:41 AM.jpg
Twist a loop on the top of each (2) 6.5 in. And (1) 8.5 in. Segment together. This will be one half of the stove. Do the same with the other three segments.

Your Done!

Put the two pieces over top of each other and make an "X" with the bottoms in the ground. You put the fire under the "X" and put a pot or anything else on top. Enjoy.