Wine Glass Candle

In this instructable I will show you how to make a candle with a wine glass.

Find a pic of a wine glass online and print it (or you can use the second pic) to be a guide or design.

After the wood is on the lathe start rounding it until it is a little thicker then you want the it to be.

Then put a mark at the bottom, and the end of the cup area(as shown in pic).

Follow your pic and carve the top.

Move the tailstock and start carving the inside, go down as much as you want, just make sure you are following the outside of the wine glass.

Now follow your design for the outside. I would recommend a small tool to do this work.

(This is a OPTIONAL STEP)

If you like the Crack in the wood style then go ahead and make a crack with a chisel.

(my wine glass cracked by its self..)

Sand your work. Then cut it off with the parting tool.

Melt some wax. After its done melting let it cool down.

Well you are waiting for it to cool down start the next step.

(This step is OPTIONAL UNLESS you have a crack)

Take the aluminum foil and tape one end to the wood (as shown in pic 2), then rap it intel you get to the crack then make a indent were the crack is (as shown in pic 3), then tape the end. I would recommend covering the whole thing with aluminum foil like the last pic.

After the the wax is cooled down pour a tiny bit of the wax on to the crack, make sure that no wax gets on the outside of the wood then let it dry for a little. Then put the candlewick in and start slowly pouring the rest of the wax in to the wine glass and let it dry.

You have finished!!!

Please VOTE FOR ME so I can make more cool stuff.