Wine Cork Trivet

by bekathwia in Craft > Reuse

12497 Views, 46 Favorites, 0 Comments

Wine Cork Trivet

cork trivet becky stern 15.jpg
cork trivet becky stern 03.jpg
cork trivet becky stern 04.jpg
Wine Cork Trivet // Becky Stern

This week I made a trivet from wine corks. It's a quick and easy project to make, once you have enough wine corks, or you can buy them online or from a home brewing store.

The most basic version just requires a large hose clamp and a screwdriver. You can scale down the design with smaller clamps to make a set of coasters, too!

To keep up with what I'm working on, follow me on YouTube, Instagram, Twitter, Pinterest, and subscribe to my newsletter. As an Amazon Associate I earn from qualifying purchases you make using my affiliate links.

Prep

cork trivet becky stern 05.jpg
cork trivet becky stern 01.jpg
cork trivet becky stern 02.jpg
cork trivet becky stern 17.gif

Arrange the corks and tighten the screw until it holds everything in place. I used a craft knife to cut down a few corks that were longer than the rest. To add a personal touch, I cleaned and spray painted the hose clamp before tightening it around the corks.

Glue

cork trivet becky stern 18.gif
cork trivet becky stern 06.jpg
cork trivet becky stern 07.jpg
cork trivet becky stern 08.jpg
cork trivet becky stern 19.gif

If you want your trivet to last more than a few uses, or stand up to transportation and storage, you'll want to glue the corks together. I like to use E6000 because of it's working time, or how long you have to adjust the pieces before it starts to set up. It dries clear and flexible in 24 hours.

Trim

cork trivet becky stern 10.jpg
cork trivet becky stern 11.jpg

I used some (embarrassingly dull) sheet metal snips to trim off the end of the hose clamp. I filed/sanded the sharp end of the cut metal to smooth the sharp edge. A coarse nail file will work in the absence of files/sandpaper!

Enjoy!

cork trivet becky stern 14.jpg
cork trivet becky stern 09.jpg
cork trivet becky stern 16.jpg
cork trivet becky stern 13.jpg

After the glue dries, the trivet is ready for use! Use it to protect your surfaces from hot pots and kettles, or just as a base for a table centerpiece. Post your version in the comments below! Thanks for reading my Instructable.

To keep up with what I'm working on, follow me on YouTube, Instagram, Twitter, Pinterest, and Snapchat.