Wine Bag-in-Box-Cup Holder
by lynedumoulin in Cooking > Canning & Preserving
1872 Views, 17 Favorites, 0 Comments
Wine Bag-in-Box-Cup Holder
This instructable shows you how to make a Wine Bag-in-Box with Cup holders from a normal wine bag-in-box. You can use any wine you want.
I added this function to optimize the wine bag-in-box for festivals.
Now you can easily fill the cup by your own and carry more cups. The light makes it even easier to fill the cups!
What Do You Need?
1 Wine Bag-in-Box
some extra cardboard
scissors
cutter knife
rope
glue
additional: small LED lamp
printed document: Wine-Bag-in-Box-Cup holder.pdf
Downloads
Remove the Bag
First open the box and remove the bag to be sure you won't cut in the bag.
Double Wall
Cut out a piece of cardboard with the same size as the biggest side plane.
Cut Out the Shapes - Paper
Cut out all the shapes from the document.
Draw
Draw all the shapes you've cut out on the wine box.
Draw the HANDLE in the middle of the top plane.
Draw the HANDLE on an extra piece of cardboard.
Draw the CUP HOLDER 4 CUPS on one of the biggest side planes.
Draw the CUP HOLDER 1 CUP on the bottom plane.
Draw the CUP HOLDER 1 CUP on an extra piece of carboard.
Draw the HOLES (two) on the plane where the wine comes out.
Draw the ROPE ENDS on an extra piece of cardboard (two times!).
Cut Out the Shapes - Cardboard
Cut out all the shapes you've drawn on the cardboard.
Attention! The shape CUP HOLDER 1 CUP is still fixed on one side.
Cup Holder 1 Cup
Glue two pieces of rope at the end of the CUP HOLDER 1 CUP. Glue the same shape at the back to make it stronger.
Glue the ROPE ENDS at the end of the ropes. (length: 14.3 cm)
Handle
Glue the two HANDLE shapes together. Add a piece of rope between them, make sure that you have a piece on both sides of the handle. Glue the end of the ropes on the inside of the box .
Led Lamp
You can add a LED light if you want. Cut out a cirkle with the same diameter as your LED lamp.