Windsor Knot Tie X2

How to tie a Double(x2) Windsor Knot in a few easy steps.

The length of the tie before tied is essential to the final product's length. Choose your length.

Cross the longer end of the tie over the shorter end of the tie.

Bring the longer side behind the "x" you've made with the tie and then pull it through. Once it is through, both ends should be opposite than they were before. When you are finished, it should look like the final picture above.

Bring the longer part of the tie around the back and then bring it through the loop in the front. When finished, you should have somewhat of a triangular form.

Bring the bigger part of the tie around the front, covering up the triangle you created in the step prior to this one.

Bring the longer part of the tie around back, up through the hole, and then pull it through the pocket you've made between the triangle and the cover up.

Pull it through the pocket.

Adjust to get the perfect triangular shaped knot, then tighten by pulling the smaller end down and pushing the knot up until it's comfortable.

Make sure the length of the tie is where you want it to be and then pull your collar down.

In 10 easy steps, that's how you tie a Double Windsor Knot.