Window Wiper Waver

This is a little addition that you can put on the back of your car and get some smiles as you drive. I made it from some scrap paper from a print that didn't work. It is really easy to make and it is fun to see how many smiles you can get.

• A4 sheet
• scissors
• Pen or Pencil

First, you will need to draw a hand with a lone hand. You could trace your hand to get it the right size. Make the longest finger almost touch the edge so that you get a long arm.

Next you will need to draw about 4 strips bout 2 cm thick. This is to hold the hand to the window wiper.

This is a simple step. All you have to do is cut out the hand but don't cut the strips that we drew before.

You will need to gently fold up the arm but not all the way up to the hand. (See the first photo.) Then you will need to cut the lines that are in the middle of the arm.

Now you will have to unfold it and poke the strips out the other side like in the photo. Now all you need to do is put the window wiper through the tube that is formed and turn on the rear wiper.