What Can Replace the Broken Intex Oars Connector
11267 Views, 34 Favorites, 0 Comments
What Can Replace the Broken Intex Oars Connector
![Aluminum-alloy-font-b-oars-b-font-outdoor-boat-font-b-oar-b-font-paddle-fishing.jpg](/proxy/?url=https://content.instructables.com/F58/3FAN/IAR36P9O/F583FANIAR36P9O.jpg&filename=Aluminum-alloy-font-b-oars-b-font-outdoor-boat-font-b-oar-b-font-paddle-fishing.jpg)
![1.png](/proxy/?url=https://content.instructables.com/FXW/WF64/IAPAPPWG/FXWWF64IAPAPPWG.png&filename=1.png)
Everybody, who has an Intex Inflatable boat or Intex Kayak has a Paddles with black plastic connector,
Start Project Step
![2.png](/proxy/?url=https://content.instructables.com/FAA/J1L0/IAPAPPWH/FAAJ1L0IAPAPPWH.png&filename=2.png)
Which is not so strong and can be broken easily.It is difficult to find on-line replacement,
and even if you find it, it will cost you around $12-14 + more,more,more.
I found new paddles for $23 on ebay, cheapest price, but I don't need new pair of paddles and
I want to solve this issue with less money.
Search Step
![3.png](/proxy/?url=https://content.instructables.com/FV0/NAIH/IAPAPPWI/FV0NAIHIAPAPPWI.png&filename=3.png)
![4.png](/proxy/?url=https://content.instructables.com/F0B/WUJ6/IAPAPPWK/F0BWUJ6IAPAPPWK.png&filename=4.png)
I found in Lowes 3/4" pipe connector, which was for $3.60 - I bought two for me.
Adjust Step
![IMG_20150609_195235.jpg](/proxy/?url=https://content.instructables.com/FQT/KB0F/IAPAPPWL/FQTKB0FIAPAPPWL.jpg&filename=IMG_20150609_195235.jpg)
I made by "Dremel", or you can use any rotary tool, the input and output cap holes little wide just for one millimeter
Decorate Steps
![IMG_20150609_200118.jpg](/proxy/?url=https://content.instructables.com/FZR/AXBI/IAPAPPWF/FZRAXBIIAPAPPWF.jpg&filename=IMG_20150609_200118.jpg)
Paint them in black.
Final Steps
![557894ec50e1b6dfd1000337.jpeg](/proxy/?url=https://content.instructables.com/FNM/GRI3/IAR369JT/FNMGRI3IAR369JT.jpg&filename=557894ec50e1b6dfd1000337.jpeg)
![IMG_20150610_075134.jpg](/proxy/?url=https://content.instructables.com/FUG/9WCA/IAR369DT/FUG9WCAIAR369DT.jpg&filename=IMG_20150610_075134.jpg)
And mount connector to paddles parts.
Caps, then rubber rings
Connect all parts and see the result.
You finished good job and save some money for the beer ;-)))