Wetsuit Hanger
Plywood wetsuit hanger for keeping your wetsuit, boots and gloves organised for quick drying .
Supplies
1/2" thick plywood 30cm X 40cm.
60cm paracord
60cm paracord
Mark It Up and Cut It Out
Get a piece of 1/2 inch ply and mark out the template as per the picture.
Use external grade ply as the wood will be exposed to damp conditions.
Depending on the weight of your suit and quality of your plywood you may need to reinforce the lower corner with a plywood gusset.
Cut it out using a band saw or Saber saw.
Drill a hole in the centre to hang up the hanger using paracord.
Voila
Use external grade ply as the wood will be exposed to damp conditions.
Depending on the weight of your suit and quality of your plywood you may need to reinforce the lower corner with a plywood gusset.
Cut it out using a band saw or Saber saw.
Drill a hole in the centre to hang up the hanger using paracord.
Voila