Welding With Superglue (cyanoacrylate), Baking Soda (sodium Bicarbonate) and Instamorph .
by rodrigov in Workshop > Repair
5575 Views, 6 Favorites, 0 Comments
Welding With Superglue (cyanoacrylate), Baking Soda (sodium Bicarbonate) and Instamorph .

Broke
It's Broke!

Both metal legs of my ironing table broke.
Stuff Needed

I glue it back with superglue and baking soda.
Layers of Superglue and Baking Soda


You must put a layer of superglue and immediately pour baking soda over it.
Wait a few seconds and repeat it.
Make a few layer this way in both sides if possible.
Instamorph Ring

To keep the place stable i added a ring of thermoplastic (Instamorph)
Voilá
.jpg)
Saved a few bucks fixing instead of buying.
FAIL!

Unfortunately the glue+soda wasn´t strong enough for this job.
I used the table a couple of times but today it failed.
:(