Wavy Table With Slicer for Fusion 360

by sandipan_ in Workshop > Laser Cutting

1469 Views, 5 Favorites, 0 Comments

Wavy Table With Slicer for Fusion 360

Fusion 360 is Future of CAD , It's a terrific application for Engineering and Manufacturing Model making for Tool Path Generation. I am using it for Product Design and Visualization. I wanted to take basic shapes and give them a 'twist' . Not sticking to the convention of four legged table. With Fusion 360, Rhinoceros and Slicer for Fusion 360 , it becomes very easy to visualize and make actual prototypes in the blink of an eye.

Designing the Form in Autodesk Fusion 360/ Rhinoceros

Capture 10.PNG

Importing It to Slicer for Autodesk 360

Capture 5.PNG

Capture 6.PNG

Capture 7.PNG

Choosing the Slicing Tool/ Modifying / Shrinkwrap

Capture 12.PNG

Capture 11.PNG

Generating Plans for Illustrator

Capture 8.PNG

Arranging the Vectors in Illustrator

Capture 13.PNG

Settings for Laser Cutting Software

Laser Cutting

First Attempt - Cardboard

Going Back to Slicer and Adjusting the Stacks

Capture 3.PNG

Capture 4.PNG

Repeating All the Steps Again

Capture 9.PNG

Subsequent Attempts With Improved Stacking