Watermelon Sticks
by openproducts in Cooking > Snacks & Appetizers
18281 Views, 339 Favorites, 0 Comments
Watermelon Sticks
An apple corer is a great kitchen tool. This Instructable applies one to a watermelon, but a corer also allows serving various other fruits or vegetables in an original way.
Using this conventional apple corer gives cylindrical shapes up to a length of approximately 7.5 centimeters max (3 inch) and a diameter of 18 mm (0.7 in). A watermelon gives a really nice result because the rind can be cut out as well, resulting in a layered color pattern as can be seen in some of the pictures.
The cumulative mass of the sticks amounts to approximately 70% of the initial weight on the watermelon slice (dependent on the space that is left in between the holes). The leftover part with the holes is perfectly fit for human consumption: don't waste it.
The resulting rounds or cylinders can be used in various configurations, for example as standing sticks (see Step 1), as an Instructables' logo (see Step 2) or as 1.4 dpi matrix characters (see Step 3).
Using this conventional apple corer gives cylindrical shapes up to a length of approximately 7.5 centimeters max (3 inch) and a diameter of 18 mm (0.7 in). A watermelon gives a really nice result because the rind can be cut out as well, resulting in a layered color pattern as can be seen in some of the pictures.
The cumulative mass of the sticks amounts to approximately 70% of the initial weight on the watermelon slice (dependent on the space that is left in between the holes). The leftover part with the holes is perfectly fit for human consumption: don't waste it.
The resulting rounds or cylinders can be used in various configurations, for example as standing sticks (see Step 1), as an Instructables' logo (see Step 2) or as 1.4 dpi matrix characters (see Step 3).
Standing Watermelon Sticks
Cut the watermelon in thick slices. The top and bottom part allow making little pillars with the rind still on it. The middle slices give pillars that are red from top to toe.
The next step shows the Instructables' logo made from watermelon pixels.
The next step shows the Instructables' logo made from watermelon pixels.
Instructables' Logo
Although the resolution is not high, one might discern the Instructable's logo in this picture. In order to obtain as many pixels as possible the melon slices should be rather thin (approximately 1 cm or 0.4 in).
The next step shows how to easily write letters using the watermelon rounds.
The next step shows how to easily write letters using the watermelon rounds.
Writing in Matrix Fonts
These 1.4 dpi matrix characters allow writing any word or sentence, as long as you have enough space (and watermelon) available.
License
This Instructable is being made available through a Creative Commons Attribution (CC-BY) license.
Republishing this Instructable is allowed, provided it is being attributed properly (cite the name openproducts, link to www.openproducts.org, www.instructables.com/member/openproducts, or the original Instructable. For other arrangements send a Private Message through the instructables member page (www.instructables.com/member/openproducts).
If this design infringes any rights then refer to Article 28 in the Terms of Service (www.instructables.com/tos.html).
Republishing this Instructable is allowed, provided it is being attributed properly (cite the name openproducts, link to www.openproducts.org, www.instructables.com/member/openproducts, or the original Instructable. For other arrangements send a Private Message through the instructables member page (www.instructables.com/member/openproducts).
If this design infringes any rights then refer to Article 28 in the Terms of Service (www.instructables.com/tos.html).