Waterfall/ Triple Single Rainbow Loom

I call this bracelet a waterfall because it reminds me of flowing water. Most people know this bracelet as a triple single. It is pretty simple.

You will need
1) two or three different color rubber bands
2) hook
3) loom *knockoffs work*

Start with the arrows on your loom facing away from you. If you don't have arrows, then make sure the open part is facing away from you.
Start on the left and place your bands going up, this will be one of the outsides. Go to the middle and go up the loom, make sure your left side and the middle bands are not touching. Do the same to the right side, this will be the other side of your bracelet.

Your arrows should still be facing way from you. Start making an upside down triangle. Go up the loom like this.

Now the arrows or the open side should be facing you. Start looming the band at the beginning till you get to the end of the loom. Do this for all of the sides

You need to bring the left and the right side to the middle and put a band in to hold them together. Pull off by this band.

Make a chain (in earlier instructable) off one of the sides.

Clip both sides together.

Now you have a bracelet you can wear or give to someone.

Please leave comments, favorite, and follow.