Water Fountain

this is what the final product should look like

materials needed

some of the materials i got from hobby lobby and amazon

as for plants and rocks from home

also need a container like 2ft tall

first drill a hole at the bottom of the small bowl and put the plastic tube securing it with hot glue and also from inside the bowl securing it with glue around it

second grab a container drilling a whole at the bottom putting the plastic tube in it and secure it with hot glue

when you put the plastic tube in the small bowl should sit on top and secure it with hot glue

on the other end of the container make two cuts on both sides so it sits on top of the big bowl and add hot glue

then to the small bowl you want to make a cut on the side make make sure it big enough so the water can come out then i used an easter egg and cut it so that the water can fall down and into the other medium bowl and adding hot glue

should look something like this

now with the other bowl repeat doing the same cut on the side

finally is the final touches before adding the rocks put the water pump in the bowl and use the rocks to cover it i made sure to add enough rocks so that the second bowl can sit on top and then added water, plants, and roses as decor

now add the bowl from where the water is dripping sitting it on top of the rocks and done!