Water Bottle Raft

by masterminnich in Outside > Boats

14767 Views, 13 Favorites, 0 Comments

Water Bottle Raft

Joseph's Float 8-09 034.JPG
Want to make an easy raft for your pool or even the beach? Well you can take the green way and make it from bottles!

Tools and Materials

bottles.jpg
Tools:

Blade

Materials:

Cardboard
Bottles
Wire
Tarp
Zip Ties
Big bags
Heavy duty tape (optional)
Seat (optional)

Collecting the Bottles

bottles.jpg
To get bottles you can ask your neighbors for their bottles when it's recycling day and often check your trash and recycling for bottles. When you go to a REC soccer league ask everyone for their bottles. In a week you should have about 200 litters worth.

Shaping the Box

Joseph's Float 8-09 005.JPG
You WILL need a BIG box! I used a box from a couch. Flatten the box then take a blade and cut it 2 feet from each edge but only half way so you can fold it easily. 

Bagging the Bottles

Joseph's Float 8-09 005.JPG
Joseph's Float 8-09 034.JPG
Joseph's Float 8-09 008.JPG
Take the amount of litters and divide it by four. Then count out that number in bottles then put them in the bags.  Then cut a hole through the box then zip tie the bags there.

Wiring and Attaching Seat

Joseph's Float 8-09 008.JPG
Fold the tarp over the cardboard then cut a hole through the the tarp and tie it to one end then pull it diagonally then to the side then diagonally then tie it again. If you want a seat a car seat works best and is easy to put in. To attach it cut holes in the cardboard and zip tie it to the cardboard.

Have Fun!

Joseph's Float 8-09 034.JPG
put it in your pool and measure people and then put 'em in and see how much it holds. surprisingly mine held 400 pounds until the cardboard ripped. So some advice is to put double the cardboard.