Walnut Halloween Head

by cartonus in Workshop > Laser Cutting

1740 Views, 8 Favorites, 0 Comments

Walnut Halloween Head

catonus-laser-cut-walnut-1200x1000.jpg

In this instruction, we will show you how to make luminous head for Halloween from ordinary walnut using laser machine, screwdriver and light bulb. Let's start!

Supplies

  • Walnut
  • Laser machine
  • Led lamp

Laser Cut

catonus-laser-cut-walnut-sq-5.jpg

Take a walnut.

Fix it on laser machine table.

Cut out the face of halloween pumpkin.

Cut hole from the bottom for the LED.

Remove Excess

catonus-laser-cut-walnut-sq-4.jpg

Remove the cut out parts with knife.

Remove the walnut insides through the holes. Use thin screwdriver.

Base

catonus-laser-cut-walnut-sq-00.jpg

Make holes in the base. Use paper or carton box.

Insert the LED string lights into the holes.

catonus-laser-cut-walnut-sq-3.jpg

Put the nuts on the LEDs.

Turn on the power.

TA-DAH!

More Walnuts!

catonus-laser-cut-walnut-sq-1.jpg

Add more walnuts.

Video Instruction

Making pumpkin head from walnut with laser machine

More laser cut funs at cartonus.com