Wall Charger With Extended Outlets and Night Light
by lamkhang4619 in Craft > Digital Graphics
289 Views, 3 Favorites, 0 Comments
Wall Charger With Extended Outlets and Night Light
![Screenshot (38).png](/proxy/?url=https://content.instructables.com/F3H/U4J3/KUQYHBGN/F3HU4J3KUQYHBGN.png&filename=Screenshot (38).png)
An outlet extension Could be pretty helpful for daily uses at some points. This will instrucables will show you my intentions of this project and design
Inspirations and Research
![HTB1RgSuX3jN8KJjSZFgq6zjbVXao.jpg](/proxy/?url=https://content.instructables.com/F9G/EQLY/KUPIYN3B/F9GEQLYKUPIYN3B.jpg&filename=HTB1RgSuX3jN8KJjSZFgq6zjbVXao.jpg)
![rBVaI1hKEASAUQTaAADj7FzNxVI003.jpg](/proxy/?url=https://content.instructables.com/FCS/E6VE/KUQYH2NR/FCSE6VEKUQYH2NR.jpg&filename=rBVaI1hKEASAUQTaAADj7FzNxVI003.jpg)
There's alot of ways you can charge you're phone but what if there was more to it, instead of hanging with a wire or anything like that, what if it could function as other things too. So thats where the extra night light and outputs came from.
Design Details
![Screenshot (34).png](/proxy/?url=https://content.instructables.com/FIB/6KKD/KUQYHBFO/FIB6KKDKUQYHBFO.png&filename=Screenshot (34).png)
![Screenshot (39).png](/proxy/?url=https://content.instructables.com/FKM/W88C/KUQYHC72/FKMW88CKUQYHC72.png&filename=Screenshot (39).png)
![Screenshot (37).png](/proxy/?url=https://content.instructables.com/FQR/PUI0/KUQYHBFQ/FQRPUI0KUQYHBFQ.png&filename=Screenshot (37).png)
![Screenshot (35).png](/proxy/?url=https://content.instructables.com/FCG/M0B6/KUQYHBFP/FCGM0B6KUQYHBFP.png&filename=Screenshot (35).png)
This is the product that I came up with after, under is an output because the product itself is most likely to block the other one on your wall, on the sides is 2 USB ports for other uses. On top is a switch to turn the lights on or off
With the Phone
![Screenshot (30).png](/proxy/?url=https://content.instructables.com/F8E/X4KA/KUQYHBFK/F8EX4KAKUQYHBFK.png&filename=Screenshot (30).png)
![Screenshot (31).png](/proxy/?url=https://content.instructables.com/F8R/2HI1/KUQYHBFL/F8R2HI1KUQYHBFL.png&filename=Screenshot (31).png)
![Screenshot (32).png](/proxy/?url=https://content.instructables.com/F8X/ZHFC/KUQYHBFM/F8XZHFCKUQYHBFM.png&filename=Screenshot (32).png)
![Screenshot (33).png](/proxy/?url=https://content.instructables.com/FOU/5NH9/KUQYHBFN/FOU5NH9KUQYHBFN.png&filename=Screenshot (33).png)
This is what the product would look like with your phone on it charging
Conclusion
Overall this was just a project I thought would be nice to have for basic daily uses, It has many more features than a normal phone charger, The lights could act as a night light or just to help spot where the charger is. The extensions such as the USB ports and output can just simply save alot of space without the use of extra wires going around one output just to have more slots to charge your phone or plugging other stuff