Walkman Soap Dish: No Soap Radio

by randofo in Craft > Soapmaking

9856 Views, 15 Favorites, 0 Comments

Walkman Soap Dish: No Soap Radio

soapMain3.jpg
soapMain1.jpg
soapMain2.jpg
This is a rugged soap dish made from an old sport-style walkman.

About the title:

"No soap radio" was the punchline to a "joke" I vividly recall from grade school. The joke basically goes as follows:

"Two elephants are sitting in a bathtub. One says: 'Pass the soap.' The other elephant says: 'No soap, radio.'"

...at which point, upon delivery of the punchline, everyone would crack up hysterically except the one person who didn't know the joke was on them. What basically was happening was that a bunch of kids would gang up on another person and tell them a joke which made no sense and then make fun of them for not understanding the nonsensical joke.

It really was much more mean than funny. And having been on the receiving end of this cruelty at least once in my life, it has left a lasting impression. So, when I was looking at this soap dish and wondering what to call it some fifteen years later, the first thing that came to my mind was "no soap radio." Maybe now I can use it to wash away all of those painful memories.

Go Get Stuff

soap1A.jpg
You will need:

- An old and/or broken walkman (preferably of the "Sports" / water-resistant variety)
- A hot glue gun
- A set of small screwdrivers

Remove the Electronics

soap2A.jpg
soap2B.jpg
soap2C.jpg
soap2D.jpg
soap2E.jpg
soap2F.jpg
Remove all of the electronics, mechanical parts and any extra metal plating from the inside of the case.

Glue in the Buttons

soap3A.jpg
soap3B.jpg
soap3C.jpg
soap3D.jpg
Now would be time to glue in place the buttons for play, stop, rewind and fast forward.

As well, glue in place any other buttons that will fall off if they are not attached to the case.

Glue the Switches and Nobs

soap4A.jpg
soap4D.jpg
soap4B.jpg
soap4C.jpg
For any switch that might be held in place with a metal screw (such as the volume knob), remove the screw and glue it in place.

Now is also that time to remove all of the extra metallic objects from the case. If the metal can't be removed, cover over it with hot glue.

Wash Off the Case

soap5A.jpg
Wash off the inside of the case with soap and water and you're done.

Go get a bar of soap and put it inside.