Mad Pet Vibro Sheep

Hi, in this instructable I am going to teach you how to make a robo sheep that is actually so small that you can carry it anywhere.This sheep is a kind of vibro bot. But it has amazing features and is very cute.

Before starting the instructabe I recommend you to watch the video so that you know how it works.In the video I have kept my finger in the center an the sheep is rotating around it,in the end of the video when I remove my finger, it begins to wander here and there.

You can open the picture above and drag your mouse over the items to know about them.

You will have to attach the the metal wire to the positive side and solder a long wire to the negative side.When you are done with it just add a bit of foil as sown in the second picture.

you will have to place the motor exactly in the opposite side as shown in the image,in the image i have kept it in the wrong place

Take a piece of foil and attach it with any wire of the motor as shown it the picture. Make sure you are placing it correctly, as its place is very important.

I used a 3v battery for the sheep. Place it above the piece of foil as shown in the picture. Its damn easy,right?

Remember a metal piece in the material list? Place it above the battery . Then tape it well, so that the battery and the metal piece are in contact and at the same time fixed sturdily to the base.

Cut 4 small cute legs and one head and tail. I used double sided tape to attach them to the the base.You can also use glue or gum to do so. Your Instructable is complete! You can gift this thing form your valentine to your Dad ,Its an perfect gift to show your creativity. Don't be shy to comment. Please.

by - Aaakash Mansukhani