Walking Figure Pendant

You will need some1/8" diameter copper wire, some pliers, a hammer, and some thread. With these I will show you how to make a cool, easy pendant with copper.

Make a loop in the copper wire using the pliers.

Take the other end of the wire, and using the pliers, bend it back to the loop.

Take the remainder of the wire from the larger loop and wrap it once around the straight part of the copper.

Put the figure on an anvil and hit it with a hammer until the side of it is some what flat.

Use a piece of thread to tie a barrel knot through the head of the figure.

This is what your pendant should look like.