WIWIWI

WIWIWI will be able to be a cat (literally) it will be chubby and super adorable for peeps to look at and see how it works. WIWIWI will be able to come to you leave walk anywhere, just the a realistic cat. The cat will also have Accessories to take off and put on, like interactive glasses, necklaces, dresses(she will be a girl.) (If the cat won’t scream then you will be able to interact with it by pressing it and it will do something or i’ll come up with something later on) The cat will also overlay over the wheels to make it seem more robot-ish . The cat will also be able to just roam around, avoid things, and just be a normal companion cat.

These are some of the basic supplies for my cat robot. Mostly everything was built from parts that are easily accesable like cardboard, paint ect.

THINGS YOU WILL NEED:

HOT GLUE GUN

HOT GLUE STICKS (about 23 of them)

SCISSORS

TAPE DISPENSER AND TAPE

EXACTO KNIVES

PAINT BRUSHES (4)

PAINTS (BLUE, PINK, BROWN, ORANGE, WHITE, BLACK,)

PAPER (BROWN, PINK, RED, WHITE, ORANGE, YELLOW,GREEN)

CODING PART:

4 WIRES (3 extra just in case)

COMPUTER (has to have parallax)

BATTERY

WIRE TO CONNECT CIRCUIT BOARD TO COMPUTER

SPEAKER

2 LEDS (2 extra in case they burn)

220 RESISTORS

EYE ANTENAS

Get a regular box or a small box and cut the top into a curve, cut it in the middle and cut up make a hollow side. this will be the cats back.

once it has been cut, add a flap on the side to be able to look inside the circuit board, as well as cut 2 little ears out of cardboard and add them with hot glue gun.

at the bottom of the cardboard, add 2 little feet (make circle and cut those 2 circles and glue it with hot glue) and cut the entire part of the bottom (this will be where the circuit board will go.

add an additional cardboard inside to make it go up and down to see inside circuit without taking off box (the problem with step 2 is it could not elevate all the way, so adding an extra cardboard part would be able to lift up and down without breaking and adding more hot glue)

My cat will be a girl and have accesories that will be added later on, for now i added a cute pink dress to fit in that she is a girl, you will need to cut a small cardboard piece to add to the back so it bends to fit the cat. you will then cut a curve stripe piece of white paper to make lace, and a red stripe as a red lace. the last step is to add 2 tiny cardboard pieces to stick to the cat on the side of the torso (make additional 2 holes so that the dress sides can stick)