WHEEL BALANCING

Step One

Static
"Wheel Balancing"
Equipment by Snap-On

Step Two

Equipment with
"Counter Balance"
In Place

Step Three

Snap-On
Data Plate
(Enlarged to some degree)

Step Four

Equipment with
"Protractor"
In Place(Divides
Assembly into One-Thirds)

Step Five

Hub & Drum Mounted.
Heavy Spot Marked at
Bottom with Chalk

Step Six

Hub & Drum
Counter Balanced
with 2.75 Ounces

Step Seven

Tire and Wheel Mounted.
Heavy Spot Marked at
Bottom with Chalk

Step Eight

Tire and Wheel
Counter Balanced
with 2.75 Ounces

Step Nine

Hub & Drum, Tire & Wheel
Mounted with Heavy Ends
Opposite Each Other Best
Possible. Note White Chalk
on Drum at Bottom, &
Chalk Mark on the Tire
at Upper Right

Step Ten

Complete Assembly
Mounted Showing
New Heavy Spot at
Right Arrow and
Counter Balanced
with 4 Ounces

Step Eleven

Complete Assembly
with Protractor in Place
Dividing Wheel into
120 Degree Sections.
Note Arrow at Bottom &
Marks at Upper Left
and Upper Right

Step Twelve

Lead Weights
In Place
at 120 Degrees
from
Heavy Spot

Completion

Balancing
Completed