WALL MOUNT a CURVED TV

Do you have a problem mounting your curved TV? We have a very simple and detailed four step procedure to follow, if mounting FLEXIMOUNTS model CR1. There is no need to hire anyone to do this for you. Take charge and follow our lead:
To begin, you will need to have;

1)A drill machine; for drilling through a concrete or wooden stud.

2)Pencils; for marking of exact spot you need to drill.

3)A measuring tape; for measurements

4) Screw drivers

With this available we move on to the first step.

No matter what your wall is made of, be it concrete or wood you are perfect. The first thing to do is:

If concrete wall hold, TV wall mount, FLEXIMOUNTS model CR1, against the wall and make four marks where you would install the screws.

On your concrete wall, drill four holes where the marks were made. (If mounting on wood stud walls, identify where the studs are, then make four marks on the wall where you would install the screws.)

Install screw anchors into the drilled spots of the wall. Then secure the TV wall mount to the wall using screws and washers taken from the package provided.

Connect the mounting plates to back of your TV using four screws.

To do this you will need to slide mounting rails onto the mount plate, then move on to clip the two arms into the gear to secure the TV on the mount. Finally, stick the magnetic pendants on the brackets.

Keep everything looking tidy and neat. Clip the cable management cover to the mount and manage the cable neatly to fit under the cover.

With all these steps followed thoroughly, you can be sure your curved TV is at the place it deserves to be and applaud yourself on becoming a TV WALL MOUNT, FLEXIMOUNTS model CR1 expert.