Voldemort's Wand

Follow these instructions to make your very own... Dark Lord wand.

You will need:
- Polymer clay
- Sculpting tools
- Microwave oven
- Hot glue gun
- X-acto knife
- Chopsticks
- White paper
- Assorted paints

Start off by gluing the paper on the chopstick and rolling the chopstick to make a very thin funnel shape. It should be about 5-6 inches long.

Sculpt the handle on the wand. This will take some time so don't rush, use some pictures as reference if needed. When finished test fit it on the base. I baked mine for about 30mins at 270.

I cut a peice of wire from a coat hanger that I then glued to hold the handle and chopstick together to make the wand. *I did this after painting both of them*

Give the wand parts 2 coats of white and then touch up with brown and black. I waited about 15 minutes between each coat. I glued them together after they were dry.

This is a simple stand that was composed of 3 peice of cardboard.

Taa Daa! You are now a Dark Lord! I hope you enjoyed this tutorial.