Volcano Incense Holder V2

Hi All,

In this instructable, I will share how to make a simple volcano incense holder using 2 part resin clay (mold-it)

• 2 part Resin clay or Mold-it
• Sculpting tools
• Talcum powder
• Acrylic paint and paint brush
• Cardboard(thin)
• compass
• scissors

• Draw a semi-circle on a cardboard
• Initially, I tried with a diameter of 11.5 cm
• But was too small, I adjusted it to 13 cm
• fold the cardboard to make a cone,
• Use paper tape to stick the two ends and edges

• Mix equal parts of the 2-part resin clay
• Apply talcum powder on your hands
• Make a small disc of clay and set it aside to dry
• Apply a thin layer of clay on the cone
• Try to distribute the clay to make good and even wall
• Let this dry or harden for 1 to 2 hrs

• Carefully peel the cardboard
• And we have our volcano shape

• Apply a thin coat of dark brown acrylic paint, and let this dry for 2 hrs
• Use green and paint a thin layer on the mountain
• Using Red color and making the volcano eruptions, you can be creative
• Using Orange color and shade leaving red borders
• Finally, use Yellow color at the tip and a gradient toward orange/red
• You may have to do yellow highlights to give the effect
• Let it dry and apply varnish if needed

We are done. Put a incense inside the volcano and enjoy your creation