Vodka Magnum Bottle Lamp
Reuse a Grey Goose 1.5 l making a table lamp!
Bottom Cutting
using a glass-cutter and several hot/cold cycles remove the bottom
Carving the Support
In a square and sanded piece of wood, carve a 6mm width circle. The diameter must be the same of the bottle's
Holes and Wires
Two holes in two faces of the base will let pass the electric wire through the wood.
Finishing
Add a switch and a bulb holder, fix the bulb-holder to the base using epoxy glue. Place the bottle in is place and ligh on!
Process Details Soon
Sorry for the poor description and the few photos showing the entire process, unfortunatly theese were tge only i had on my mobile. I will soon take and upload more pictures.