Vintage Mail Box for Kids

by amalkhan in Living > Kids

4005 Views, 79 Favorites, 0 Comments

Vintage Mail Box for Kids

27.jpg.jpg
23.jpg.jpg
29.jpg.jpg

It's that time of the year when being outside is absolutely magical for kids. I decided to up that ante with a mailbox just for them! Now they can receive "letters" and post their own mail! A little Imagination is all you need!

See how I transform a boring old mailbox into a colorful, vintage mailbox for kids!

Let's get started!

Prepping Mail Box

1.jpg.jpg
2.jpg.jpg
3.jpg.jpg
5.jpg.jpg
4.jpg.jpg
9.jpg.jpg
8.jpg.jpg

I bought a glossy-finished vertical mailbox that was approximately 6x9 inches. I knew I wanted to hang the final product outside, and also because bright colors are what childhood are all about, so I decided to paint the mail box a beautiful hue of turquoise.

Before spray painting, I lightly sanded the glossy mailbox so that the paint/primer would have a better time being applied. I used a 150 grate sand paper. As you can tell from the photos, just 5 minutes of hand sanding completely altered the black finish. Next, I wiped the mailbox thoroughly with a damp cloth so there would be no sand/ paint residue.

I choose a satin finish Valspar paint and primer in one, and waited about 1 hours between coats, of which I applied only two. However, if you choose to go with a lighter color, you may need to apply more coats to achieve even coverage.

After the final coat, I waited about 36 hours to allow the paint to harden.

Adding on the Letters

11.jpg.jpg
10.jpg.jpg
13.jpg.jpg

You can find mdf letters at your local craft store (I was lucky enough to have a laser printer at my disposal). I decided to really ride the vintage feel, and chose the word "POST." I simply hot glued the letters to the center of the mail box.

Wiring the Box

14.jpg.jpg
15.jpg.jpg
16.jpg.jpg
19.jpg.jpg

I knew I wanted to hang the mailbox from a tree in my backyard, but didn't want to drill into bark with screws, so alternatively, I bought craft wire from Michael's faux floral department. This stuff was a god-send, because it was a thicker gauge wire wrapped in a type of twine= completely camouflage against the bark of a tree.

I threaded some through 1 rear hole of the mail box and tied a small knot.

Stringing on Tree

20.jpg.jpg
21.jpg.jpg
22.jpg

With the remaining wire, I wrapped it around the tree trunk, cut it, and then threaded it through the 2nd hole on the back of the mailbox.

Enjoy!

30.jpg.jpg
26.jpg.jpg
24.jpg.jpg

My Kid's had a blast putting toys and outdoor-inspired artwork in their new mailbox!