Vintage Camera - Reusing Cardboard

Vintage cameras are those which were used 100 years ago. So the model is according to the old age period. Even though it's old, it captures the beauty of scene with complete clarity. 🎥📽🎥📽🎥📽

Things Needed;

Cardboard

Fevicol

Glue gun

Glue sticks

Carton (without print on it)

Striated Cardboard

Ruler

Pencil (for measurements)

Inch tape

Sticky tape

Scissors ✂️

Cutter

Pen

knife

Compass

Take a rectangular carton which is suitable for making the body of the camera 🎥📽🎥📽

Get striated cardboard and make it as long strips. Stick it as borders to all sides of the carton.

Make a 3D model of a trapezium (4 pieces)with cardboard to create the eyecup of the camera. Attach the lenses with it.

Attach a small rectangular box at the left side of the carton. Take cardboard rolls or pipes covered with striated cardboard to some extent which resembles like zoom lens and view finder. Fix the view finder in front of the small box and stick the zoom lens at the back. The zoom lens is the part to view the focus of the screen

Take striated cardboard strip and roll it into a circle. Stick it in the left side of the carton. This resembles some options like rotatable positioning knob, screen adjusting knob and zooming knob.

To make the the film reels of the camera, cut 2 pairs of circles in the cardboard where 1 pair is smaller than the other one. Cut those circles accordingly which matches with the measurements of body of the camera. Make a stand where the reels of the camera sits. Then place the stand and reels above the carton.