Vibrating Painting
![Screenshot 2019-09-22 at 12.18.02.png](/proxy/?url=https://content.instructables.com/FI0/WP98/K0UURCYK/FI0WP98K0UURCYK.png&filename=Screenshot 2019-09-22 at 12.18.02.png)
![IMG 6429](/proxy/?url=https://content.instructables.com/F00/ZRB8/K16PFF2X/F00ZRB8K16PFF2X.jpg&filename=IMG 6429)
Instructions on how to make a crazy vibrating painting
Supplies
Materials:
A big wooden plate
Painting
Motor
Breadboard
Wires
Battery
Arduino Sensor
Tools:
Saw
Drill
Tape
Chisel
Glue gun
Make a Square Hole in the Big Wooden Plate.
![YM2758-arduino-compatible-9g-micro-servo-motorImageMain-515.jpg](/proxy/?url=https://content.instructables.com/FZC/V7W9/K0UURD2P/FZCV7W9K0UURD2P.jpg&filename=YM2758-arduino-compatible-9g-micro-servo-motorImageMain-515.jpg)
Fit the motor in the hole and hot glue it stuck.
Carve a Cross in the Back of the Painting.
![IMG_6456.PNG](/proxy/?url=https://content.instructables.com/F7P/NF26/K0UURDYM/F7PNF26K0UURDYM.png&filename=IMG_6456.PNG)
![Screenshot 2019-09-22 at 13.21.32.png](/proxy/?url=https://content.instructables.com/F1G/WHKO/K0UURE4O/F1GWHKOK0UURE4O.png&filename=Screenshot 2019-09-22 at 13.21.32.png)
With the chisel carve this shape and hot glue the arm into the hole.
Connect Everything.
![IMG_6397.JPG](/proxy/?url=https://content.instructables.com/FIO/6X7B/K0UURCUL/FIO6X7BK0UURCUL.jpg&filename=IMG_6397.JPG)
![IMG_6421.JPG](/proxy/?url=https://content.instructables.com/FIA/RXQB/K0UURCUQ/FIARXQBK0UURCUQ.jpg&filename=IMG_6421.JPG)
Connect the motor to the arduino. Connect the arduino to a breadboard. Connect the sensor to the arduino and breadboard. Plug in the battery. Tape to the back of the fake wall.
Coding.
Upload this code to the arduino.
Downloads
Finalise
![IMG_6399.JPG](/proxy/?url=https://content.instructables.com/FVI/B366/K0UURCUO/FVIB366K0UURCUO.jpg&filename=IMG_6399.JPG)
Put up fake wall with the motor in and the painting connected to it. Put the sensor at the bottom of the fake wall pointing upwards.