Viberating Mesh Strainer
![Screenshot (26).png](/proxy/?url=https://content.instructables.com/FQR/OKEW/LWAOW163/FQROKEWLWAOW163.png&filename=Screenshot (26).png)
This would help you remove a ton of clumps and make sure your food and baking improve instead of having big clumps of food.
Supplies
The base of the mode(CAD)l, a strainer, a motor, and a spring
![Screenshot (30).png](/proxy/?url=https://content.instructables.com/FBG/D6AP/LWAOW278/FBGD6APLWAOW278.png&filename=Screenshot (30).png)
First construct a box
![Screenshot (31).png](/proxy/?url=https://content.instructables.com/FJ1/0FKR/LWAOW27J/FJ10FKRLWAOW27J.png&filename=Screenshot (31).png)
Build up a lay out that could hold the strainer
![Screenshot (33).png](/proxy/?url=https://content.instructables.com/F68/JYM3/LWAOW28O/F68JYM3LWAOW28O.png&filename=Screenshot (33).png)
Take out a hole that can hold your strainer
![Screenshot (34).png](/proxy/?url=https://content.instructables.com/FHE/0J9M/LWAOW29G/FHE0J9MLWAOW29G.png&filename=Screenshot (34).png)
cut off any excess parts not needed that is not needed
![Screenshot (35).png](/proxy/?url=https://content.instructables.com/FMQ/JJ2X/LWAOW2AS/FMQJJ2XLWAOW2AS.png&filename=Screenshot (35).png)
Cut out the bottom of the piece to make space for later ocupatance
![Screenshot (36).png](/proxy/?url=https://content.instructables.com/FUD/GGOG/LWAOW2D1/FUDGGOGLWAOW2D1.png&filename=Screenshot (36).png)
continue to cut of and make sure the holes are to what you would need
![Screenshot (37).png](/proxy/?url=https://content.instructables.com/FTV/FBXZ/LWAOW2FV/FTVFBXZLWAOW2FV.png&filename=Screenshot (37).png)
Add back a bottom piece not to thick to thin.
![Screenshot (39).png](/proxy/?url=https://content.instructables.com/F6S/0RHD/LWAOW2KD/F6S0RHDLWAOW2KD.png&filename=Screenshot (39).png)
Add taller walls so that the contents of the strainer to not fall out out where it should not fall
![Screenshot (40).png](/proxy/?url=https://content.instructables.com/FQQ/A84D/LWAOW2Q8/FQQA84DLWAOW2Q8.png&filename=Screenshot (40).png)
Remove a one inch hole that would be able to hold a 34mm vibration motor
![Screenshot (41).png](/proxy/?url=https://content.instructables.com/FU3/SDKS/LWAOW2WY/FU3SDKSLWAOW2WY.png&filename=Screenshot (41).png)
Make a spring holder that can hold or push against the strainer handle
![Screenshot (42).png](/proxy/?url=https://content.instructables.com/F31/EU4L/LWAOW32K/F31EU4LLWAOW32K.png&filename=Screenshot (42).png)
make a box exactly the size you cut out the box
![Screenshot (43).png](/proxy/?url=https://content.instructables.com/FBU/M2N7/LWAOW38U/FBUM2N7LWAOW38U.png&filename=Screenshot (43).png)
cut out inside the box
![Screenshot (44).png](/proxy/?url=https://content.instructables.com/FOO/KLJV/LWAOW3D8/FOOKLJVLWAOW3D8.png&filename=Screenshot (44).png)
add two pillars to later make a handle
![Screenshot (45).png](/proxy/?url=https://content.instructables.com/FIZ/LQTN/LWAOWORC/FIZLQTNLWAOWORC.png&filename=Screenshot (45).png)
connect the pieces