Vegetable Support or Trellis (or Obelisk!) What Would I Know!

by buck2217 in Living > Gardening

2557 Views, 16 Favorites, 0 Comments

Vegetable Support or Trellis (or Obelisk!) What Would I Know!

IMG_20191026_122358.jpg
IMG_20191026_123838.jpg

I like growing vegetables but finding decent supports is difficult.

I bought some from Bunnings but after a season or so they were bending and really not man enough for the job.

I have also used wood but - you know - rot and all that nonsense

I want something that will last years (at least 30!!) to see me out :-)

Supplies

Rebar (I used 10mm x 6m lengths)

Tape Measure

Marker Pen

G Clamp (turned out to be optional)

Hammer - Because hitting things is always good

Welder

Sunglasses(cos you know -- cool)

Hat - Its sunny and hot and I haven't got a lot of hair so my bonce burns

Materials

IMG_20191026_104555.jpg
IMG_20191026_104905.jpg

I bought 10 x 6m lengths of Rebar at the store, I had a bolt cutter with me to cut them in half (as I only have a small car to transport them but the very nice lad at the shop cut them for me -- TOP BANANA!! work saved

I then marked the 3m lengths in the centre using a marker pen

Bending

IMG_20191026_105006.jpg
IMG_20191026_105252.jpg
IMG_20191026_105347.jpg

I banged a 6 inch nail into a fence post and clamped the first piece into place with a G Clamp ( found out fairly soon that this was pretty much unneccessary but hey-ho) and bent the rebar around

All Bent, Time to Fix

IMG_20191026_110430.jpg
IMG_20191026_110435.jpg
IMG_20191026_111856.jpg

Put the pieces in the grass and set them out, now at this point I could have just zip tied them but..........

Welding

IMG_20191026_113823.jpg
IMG_20191026_114206.jpg

If you've got a welder, you may as well use it (and I've got 2) :-) - MIG and Arc

And in Position

IMG_20191026_114458.jpg
IMG_20191026_122351.jpg

Two to protect the Blueberries, and the rest for beans, peas etc to grow up

May make some taller (2m) ones next week

Took about an hour to make 10