Using & Fix Building Iron With Assidently Bigger Holes
by meireli in Workshop > Metalworking
186 Views, 0 Favorites, 0 Comments
Using & Fix Building Iron With Assidently Bigger Holes
![d20b7ebc-adaa-48df-8a03-030b0c3dccdd.jpg](/proxy/?url=https://content.instructables.com/FE8/MRJ2/LDYJH5NF/FE8MRJ2LDYJH5NF.jpg&filename=d20b7ebc-adaa-48df-8a03-030b0c3dccdd.jpg)
![b190240c-6a2e-462b-8f89-81ad1776393c.jpg](/proxy/?url=https://content.instructables.com/FSZ/BHNH/LDYJH4ZR/FSZBHNHLDYJH4ZR.jpg&filename=b190240c-6a2e-462b-8f89-81ad1776393c.jpg)
![d20b7ebc-adaa-48df-8a03-030b0c3dccdd.jpg](/proxy/?url=https://content.instructables.com/FJB/EWGR/LDYJH4ZS/FJBEWGRLDYJH4ZS.jpg&filename=d20b7ebc-adaa-48df-8a03-030b0c3dccdd.jpg)
![f40335ed-8800-48ef-b061-b23b59ba071e.jpg](/proxy/?url=https://content.instructables.com/FV0/WIOI/LDYJH4ZT/FV0WIOILDYJH4ZT.jpg&filename=f40335ed-8800-48ef-b061-b23b59ba071e.jpg)
Using & Fix building iron with accidentally drilling holes
Supplies
hammer
building iron profile
building wire / single core electrical wire.
You can see here, the room the profile have. and thats not good.
![d20b7ebc-adaa-48df-8a03-030b0c3dccdd.jpg](/proxy/?url=https://content.instructables.com/FL4/TOO2/LDYJH55J/FL4TOO2LDYJH55J.jpg&filename=d20b7ebc-adaa-48df-8a03-030b0c3dccdd.jpg)
![f40335ed-8800-48ef-b061-b23b59ba071e.jpg](/proxy/?url=https://content.instructables.com/FT9/VUA9/LDYJH55K/FT9VUA9LDYJH55K.jpg&filename=f40335ed-8800-48ef-b061-b23b59ba071e.jpg)
Round a wore over frew cm above, to add some greep. the use humer to stick it in.
![b190240c-6a2e-462b-8f89-81ad1776393c.jpg](/proxy/?url=https://content.instructables.com/FKQ/9F6Q/LDYJH5BY/FKQ9F6QLDYJH5BY.jpg&filename=b190240c-6a2e-462b-8f89-81ad1776393c.jpg)
Done here.
If you have some loose connection, you may try to add additional wire around.
Make sure to use a dedicated bilding iron profile, cause they have this greeping bump all over them.
Good luck :)