Usb Stick Keychain Holder.

Screen Shot 2023-11-21 at 2.17.38 PM.png

Screen Shot 2023-11-20 at 2.22.17 PM.png

steps on how to make a food/soda keychain that could hold an usb stick.

Supplies

Screen Shot 2023-11-21 at 2.32.10 PM.png

what you are going to be needing to design a soda can

2 cylinder
3 tubes
a square
a text
and a scribble
and most importantly a 3d printer.

sizes of usbs -What Size of USB Flash Drive Do You Need?

Creating the Can

Screen Shot 2023-11-21 at 2.19.42 PM.png

Screen Shot 2023-11-21 at 2.21.42 PM.png

first you have to set a cylinder at whatever height (this cylinders height is 71.00) it could be depending on what kind of soda you want to create it could be a can or a bottle for instance I am making a can. step 2: you could change the color of the soda and set the sides to 12 to make it have that texture.

Make the Can Look Realistic

Screen Shot 2023-12-01 at 2.11.28 PM.png

Screen Shot 2023-12-01 at 2.14.50 PM.png

next step is to add a tube on top of the cylinder so that it could look like the cap ( change the color to green so that it could match with your shape). The next thing you will have to do is add another tube under the shape so that it could look more realistic (change the tube color to green as well ! ).

Adding the Holder/ Name of Soda

Screen Shot 2023-12-01 at 2.19.54 PM.png

Screen Shot 2023-12-01 at 2.32.42 PM.png

Screen Shot 2023-12-01 at 2.35.49 PM.png

after that add a ring and make the shape thinner so that it could look like a holder for the sprite can ( make it green again). Next thing you have to do is add a text and make sure it is not floating on the air and make sure it is touching the surface. Next step is to change the texts color to white so that it could actually look like the design the sprite can actually has.

Adding Designs

Screen Shot 2023-12-01 at 2.38.21 PM.png

Screen Shot 2023-12-01 at 2.39.34 PM.png

Screen Shot 2023-12-01 at 2.43.27 PM.png

Next thing is you will have to add 2 scribbles onto the top and under of the sprite logo and make the sprite logo white.

Last Step ( Creating a Hole)

Screen Shot 2023-12-11 at 2.11.33 PM.png

Screen Shot 2023-12-11 at 2.12.51 PM.png

Screen Shot 2023-12-11 at 2.13.13 PM.png

Screen Shot 2023-12-11 at 2.14.43 PM.png

Screen Shot 2023-12-11 at 2.14.51 PM.png

Screen Shot 2023-12-11 at 2.15.10 PM.png

Screen Shot 2023-12-11 at 2.15.48 PM.png

Last step is to use a square box and shape it to the size of your usb, and make it fit in the middle of the soda can so that you could make a perfect hole. after you group it all together and it will come out like the last 2 pictures at the end. And there is your soda can usb holder.