Upcycled Pouffe

by aerobil in Craft > Reuse

674 Views, 2 Favorites, 0 Comments

Upcycled Pouffe

IMG_20160426_163346919.jpg
It's like farting in silk.

Materials

IMG_20160426_163902971.jpg
You'll need both the padding and a soft case.

Use anything soft and fairly inert for the padding. I personally enjoy using my "softballs", as they're readily available and upcycled.
Make sure you check the following instructable to learn how to make them: https://m.instructables.com/id/Softballs-Hack-Your-Garbage/?ALLSTEPS

Use any soft and strong material for the outer case. Prefer something fairly natural over synthetic stuff: you don't want to turn into a ball of sweat... Also, try to reuse stuff lying around.
I had an old pierced airbed I couldn't get to fix, perfect!

Prepare the Case (here, the Airbed)

IMG_20160426_164053040.jpg
IMG_20160426_164120137.jpg

Cut one side edge open, preferably the shortest one.
If your airbed has inner strips of material that connects its sides together, cut them off to turn the bed into a giant sack.

Filling Up

IMG_20160426_164157294.jpg
Time to fill up with your padding material.

The correct amount is to everyone's discretion but I'd recommend quite a bit if you want to be able to shape it easily. Also, don't forget that it compresses quite a lot when you sit on it.

Once you're satisfied with the shape and size, close it up.
Use any binding technique you like or, as I lazily did, simply roll the top over itself.

Sorted.

IMG_20160426_164620167.jpg

Enjoy a nice seat, free, upcycled, perfect.

Thank you and happy DIY!