Upcycle a Cassette Player (how to Break Up With Old Technology)

There comes a time when our relationship with technology must end.
Look, I know you're a player. Everyone knows. I can't really be seen with you anymore unless you change.
I get those looks from people. Why-is-she-with-that-player grimace and Get-with-the-new-tech high brows.
I'm going to change you, for you. You might actually have a second chance. 
X)

It's really not them, it's us, but we've been betrayed by 8 tracks and we're sensitive to a relationship with new technology right now.
Fret not. 
This project will show you how to turn that Cassette player into a brand new ... plastic, holding box... 
(Aye! but it's based on a real treasure chest!)

The first step is to get rid of everything on the inside. This particular player had 3 visible screws holding the circuit board down. There was one in the back that I didn't know was also holding it down. 
I removed all the buttons and knobs as well.

Once you've rid of the insides, measure the base and walls.
One can glue fabric onto the walls and be completely done here.
I used some cardboard, covered in orange fabric and glued to the walls and edges.

Coverings:
*Sponge
*Foam
*Fabric
*Paint
*Combinations
*None of the above

I left the player as it was. You are done. :) 
Now put your mp3 player next to your product, throw your head back and laugh.
Soon, it will have the same fate...